Cosmetic filling mold demonstration
Watch the YUNSHAN teaching video. For settings and operating instructions, refer to the tooling and formula used in your own production process.
02 / FILLING & DEMOLDING
A better start to your filling process.
Follow the operating instructions supplied for your exact tooling and formula. Use these steps to prepare for a project-specific demonstration.
Lipstick mold assembly & handling
A close-up demonstration of the mold parts and their relationship to the lipstick tube. Review the assembly with your own tooling and approved operating procedure.
Filling with a lip balm tray
See how a tray supports containers during filling. Container fit and process settings should be confirmed for your project.
STEP 01
Prepare and inspect
Check the tooling is clean, dry, undamaged and correctly assembled. Confirm all required contact surfaces and fixtures are ready under your production procedure.
STEP 02
Set up the filling trial
Use the approved conditions for your formula and tooling. Record the settings rather than transferring temperature or cooling values from a different formula.
STEP 03
Evaluate release and fit
After the approved cooling stage, follow the specified release sequence. Inspect the formed stick and check its fit with the intended package.
STEP 04
Record and review
Record defects, operating conditions and the mold or tray identifier. Share photos or video with the supplier when asking for process support.
Apply this to your tooling.
This is general preparation guidance. The approved instructions for your mold material, coating, formula and production procedure take priority.
FROM YOUR IDEA TO A TOOLING BRIEF
Need guidance for your specific mold?
Share your formula type, dimensions and filling process.
We’ll help you define the next step.